Car wax machine

The wax machine has a structure similar to the sub-slab machine . The device consists of 4 heads, each of which has an inverter to adjust the speed . The wax machine is also equipped with 3 4-liter tanks, which are used to spray wax on the stone, which can be used separately from each of the tanks according to the stone in question.

It is used to increase the brightness and increase the quality of the final Saab.

The wax spraying system in this device is done by a pneumatic system .If you do not want to use wax, special symbols that work dry can be used to increase the brightness .

A micro-switch system is used to scan the Stone profile in this device, which can turn this device into an independent device on the line.

It should be noted that this reverse engineering machine is the Breton (Burton ) Italian CGA 200/4 wax machine.

Advantages of car wax machine

۱. This device is used to increase the amount of brightness and also to increase the quality of the sub-final.
2. Using an inverter to adjust the speed of each head

Equipping the car wax machine with 3

۴-liter tanks, which are used to spray wax on the surface of the stone3.

۵.If ​​you don’t want to use wax, you can use special felts that work dry to increase the shine.

۶. Using the microswitch system to scan the rock profile

Building and spandrels

The building of this device consists of a steel monoblock welded with an electric arc. Four brushes are installed on a cast iron head, inside which a rotating shaft is placed, and its up and down movement is provided by using a pair of pistons

Accurate distribution of wax

This machine is equipped with three tanks containing wax, which are placed in the front of the machine for easy inspection.
The wax spray cycles and the position of the wax nozzles are coordinated with the position of each brush to ensure waxing of the entire stone surface.
Each spindle has a brush, these brushes are of different diameter and rotation speed to spread and polish the wax completely.
The wax feed channel is automatically cleaned at programmed intervals using an air stream. This prevents possible wax residue in the transmission pipes

Stone piece size reading device

The stone piece size reading device is installed in front of the machine. This system works by means of a microswitch and the movement of the stone and the up and down of the spindle are automatically controlled by it

The amount of wax used

This system accurately minimizes the amount of wax used by using an efficient programming software. A solenoid valve is installed on the spindle axis to adjust the amount and direction of the wax, so the path of the wax is significantly reduced and the wax is used with great precision

Technical specifications of the car wax machine