All about hand polishing stone; a simple way to make it shine again

In many cases, you don’t need large, expensive machines to repair or clean your stones. This is where a hand polishing stone comes in. A practical and affordable method that can make your stones look as beautiful as day one. Below, we’ll review the steps to do this, the tools you’ll need, and important tips to keep in mind.

What does hand-carved stone mean?

Hand sanding is a process in which the surface of a stone is smoothed and polished using simple tools such as hand tools or even sandpaper. This method is more suitable for small spaces or places where large machines do not have access.

When is a manual sub the best choice?

• • • When tiny scratches have appeared on the stone.

    • To remove small stains or dullness from the stone surface.

    • For working on edges, corners or confined areas.

    • In small home projects or technical workshops where industrial equipment is not available.

Tools you need

• • • Hand-held sander or small milling machine with appropriate blades

    • Sanding discs with different grits (usually work from coarse to fine)

    • Water spray to cool the surface during sanding

    • Polishing materials for stone

    • Safety gloves and protective glasses

Steps for performing manual stone carving

• • 1. Surface preparation: First, clean the stone well so that there is no dust on it.

    2. Start with a rougher disc: Start with a rougher disc. Your movements should be smooth and circular.

    3. Continue with a softer disc: After removing the unevenness, smooth the surface with a softer disc.

    4. Final polishing: Finally, use polishing materials to shine the stone and give it a fresh look.

Key points to keep in mind

• • • While working, keep the stone surface cool with water to prevent damage.

    • Control your hand pressure; don’t press too hard to avoid creating scratches.

    • It’s best to test on a small area before starting to make sure you get the desired result.

Benefits of manual stone cutting

• • • Much lower cost than industrial subs

    • Applicable in limited and hard-to-reach spaces

    • Suitable for minor and precise repair work

Possible disadvantages

• • • For large surfaces, it takes a lot of time and energy.

    • Requires more skill and precision.

    • If performed incorrectly, the stone surface may be damaged.

Dear friends, you can contact us for more information.