Stone wax, ceramic, etc., which are shiny from the beginning. It makes it extremely shiny and polished, and its other use is waterproofing and, most importantly, repairing and renovating the stone.
It should be noted that it is not used for dull surfaces and surfaces that have lost their luster due to corrosive substances or salt ink.
stone wax
۵ stages of manual polishing or with a stone wax machine
۱. First, clean the floor stone from all kinds of stains and dirt. During cleaning and staining, there are generally two types of stains, and some stains are not very resistant and hard and can be easily removed with water and cloth. Also, the stones that are due to paint and ink or due to impact, dents and seams, etc. can only be compensated and removed through flooring. And in general, at the beginning you need to dry the stone. Then polish the work with wax.
۲. Stone polishing with wax, which is done by the machine. You have to pour the material into the machine’s tank, then put it on the desired surface. Using the machine for polishing is very simple and easier than the manual method. But in the manual method and without a device, first use the required amount of suitable stone wax on the surface of the stone. Then, with the help of a T-towel, spread it completely on the surface of the stone.
In the following …
۳. In this next step, your stone polish should dry well. If you have polished the floor dry part by part, you must allow it. that all parts are completely dry from beginning to end. When you do the next step before the polish dries. It is necessary to make the polish matte and make that the stone is not polished well.
۴.
۴. In the next step, after the polishing is dry,
you should be able to think about the necessary measures to clean the polishing materials on the surface through a special floor machine.
In this process, clean the floor using a brush and a special floor cleaning machine. Flooring machines are equipped with an additional polishing brush.
which are in charge of smoothing and shining the surface.
۵. During the polishing process, waste will be left on the surface.
It is better to dry and clean the surface with a T-shirt. After a few days, wash the desired surface completely so that it is free of any pollution and dirt.
” Click to view and buy other products “
Advantages of using stone wax
The use of stone wax is to repair and restore the stone. Materials used for stone polishing.
It fills all the seams and holes of the stone surface well to create a smooth and uniform surface.
The stone polishing material is completely waterproof, which is created on the stone.
This material will completely eliminate the ability of water to penetrate and create water stains on it.
One of the most important advantages of stone wax is the glossiness and polishing of the stone, and when dust settles on the stone,
it will be removed in the shortest time and easily.
Stone wax consists of a non-acidic formula, so it does not cause any damage to the stone for polishing and polishing old and new stones.
The ratio of mixing stone wax with water
When you use it without a device, you should use 2 liters of water for 1 liter of wax; If you use the device,
it is necessary to use 5 liters of water for every liter of wax.
Uses of stone polishing
You can use stone polishing to shine work tools, to remove the matte shade on different parts of the facade and floor, as well as nano stone countertops,
to waterproof all kinds of surfaces.
Technical Specifications
Made in Iran with German raw materials
Volume 20 liters
Mixing with water by hand 1 liter of material to 2 water – by machine 1 liter of material with 6 liters of water.
Purchase and price of stone wax
Car body repair was established in Isfahan province. Dear ones, you can contact us to know the price and buy the products.
افزودن دیدگاه